PC Services

 

PC Services (Electronics)

Extra Libraries for PCB software Eagle by
Cadsoft Computer GmbH

Cadsoft logo
   The Company 
   Resources / Examples 
     Sullins Card Edge 
   Commentaries           
   Personal 
 
Cadsoft logo

Eagle PCB Library - Sullins Card Edge PCB Connectors

Sullins logo

Below is the description page included in the Eagle library of Sullins Corp Card Edge Connectors for 1.27mm pitch (0.050 inch) edge connector PCBs to plug into. All variants found February 2017.

  • Last updated March 2017
  • Website - www.sullinscorp.com/
  • con-edge-sullins.zip V1.00 (577 k bytes, unzipped 10MB), Sullins Corp Card Edge PCB Connectors.
  • Note this file is much larger in file size than standard supplied with Eagle but has many more variants and many coorections (see below).

Description

1.27 mm (0.050 in) Edge Connector from Sullins Corp - 5 to 120 pins per row

Description Manufacturer Created By Date Version
Edge Connector Sockets to accept 1.57 mm PCB thickness with Edge Connector fingers on for standard parts Sullins Corp
www.sullinscorp.com/
Previously Sullins Electronics

Paul Carpenter of PC Services, Reading, UK
March 2017 V1.00

Updates to this library can also be obtained from the PC Services website www.pcserviceselectronics.co.uk

Some History

This library was created because the standard library 'con-sullinselectronics.lbr' was full of mistakes and missing parts and variants. The biggest mistake was the pin numbering bears no relation to manufacturer's datasheets or any standard pin numbering method for connectors of varying numbers of pins

This library adds more standard pin number variants and more variants for mounting and fixing methods.

Source Documents for Components

Drawing No. Style Contact Type Description
C10708 HF Hairpin Surface mount
C10711 HH Through Hole - 4 rows of offset pins on 0.1 in (2.54 mm) pitch
C10709 HL Through Hole - 2 rows of pins on 0.05 in (1.27 mm) pitch, row pitch 0.25 in (6.35 mm)
C10710 HN Through Hole - 2 rows of pins on 0.05 in (1.27 mm) pitch, row pitch 0.1 in (2.54 mm)
C10764 HR Card Extender (fits on both sides of PCB) pins on 0.05 in (1.27 mm) pitch) row pitch thickness of PCB
C11422 YF Cantilever Surface mount
C11419 YH Through Hole - 4 rows of offset pins on 0.1 in (2.54 mm) pitch
C11421 YR Card Extender (fits on both sides of PCB) pins on 0.05 in (1.27 mm) pitch) row pitch thickness of PCB
C12114 YS Through Hole - 2 rows of pins on 0.05 in (1.27 mm) pitch, row pitch 0.2 in (5.08 mm)

Pin Number and variants

Parts are labelled so Top side (side with First Position Indicator) are labelled Ann and other side Bnn, starting from A1 and B1

All parts are double sided (two rows) and manufacturer part numbers from 5 pin to 120 pins per row, however a lot less are normally available, so this library is based on what was listed in their catalogue as of February 2017

Manufacturer Part Number Format

mpBnnDttf
Digit Options Description
m A, G, J, R Type of material for pin and insulator (plastic moulding)
p B, C, M Contact Area Plating
B B Contact Centres pitch along row 0.05 in (1.27 mm)
nn 5 to 120 (not all values are standard parts) Number of contacts in each row
D D Dual row
tt HF, HH, HL, HN, HR,
YF, YH, YR, YS
Termination type (see tables above and below)
f B, D, N, Q, R, T Fixing method (see table below)

As the first two digits of the part number refer to attributes that do not affect layout or circuit symbols they are not used in the rest of this library or are refered to as 'xx'

Allowable Combinations and Footprint Variants

All circuit symbols are the same for a particular number of ways.

Many variants use the same footprint, see table below for Termination Types to use ('nn' in footprint name is number of pins in row)

Note: YF, YH, YR, YS termination styles use different contacts and longer pins but same footprints as other variants listed below.

Footprints from Termination Style and Fixing Method variants
Style Type PCB Row Spacing Fixing Footprint Fixing method Description
HF Surface mount
on 0.05 in (1.27 mm) pin pitch
0.450 in
(11.43 mm)
D BnnDHFD Through Hole for fixing vertically to PCB
N BnnDHFN No fixing part
R BnnDHFR Board Locks push fit to PCB
T BnnDHFD Threaded Insert (4-40) to fix to chassis)
HH Through Hole - 4 rows of offset pins
on 0.100 in (2.54 mm) pin pitch
3 x 0.100 in
(2.54 mm)
D BnnDHHD Through Hole for fixing vertically to PCB
N BnnDHHN No fixing part
R BnnDHHR Board Locks push fit to PCB
T BnnDHHD Threaded Insert (4-40) to fix to chassis)
HL Through Hole - 2 rows of pins
on 0.05 in (1.27 mm) pin pitch
0.250 in
(6.35 mm)
D BnnDHLD Through Hole for fixing vertically to PCB
N BnnDHLN No fixing part
R BnnDHLR Board Locks push fit to PCB
T BnnDHLD Threaded Insert (4-40) to fix to chassis)
HN Through Hole - 2 rows of pins
on 0.05 in (1.27 mm) pin pitch
0.100 in
(2.54 mm)
D BnnDHHD Through Hole for fixing vertically to PCB
N BnnDHNN No fixing part
R BnnDHNR Board Locks push fit to PCB
T BnnDHND Threaded Insert (4-40) to fix to chassis)
HR Card Extender End mount
on 0.05 in (1.27 mm) pin pitch
Accepts PCB
thickness
0.062 in (1.57 mm)
B BnnDHRN Open End Slot, No fixing part
D BnnDHRD Through Hole for fixing to chassis
N BnnDHRN No fixing part
Q BnnDHRQ Saddle Mount, for Card Extender to fix to PCB
T BnnDHRD Threaded Insert (4-40) to fix to chassis)
YF Surface mount
on 0.05 in (1.27 mm) pin pitch
0.5275 in
(14.4 mm)
D BnnDHFD Through Hole for fixing vertically to PCB
N BnnDHFN No fixing part
R BnnDHFR Board Locks push fit to PCB
T BnnDHFD Threaded Insert (4-40) to fix to chassis)
YH Through Hole - 4 rows of offset pins
on 0.100 in (2.54 mm) pin pitch
3 x 0.100 in
(2.54 mm)
D BnnDHHD Through Hole for fixing vertically to PCB
N BnnDHHN No fixing part
R BnnDHHR Board Locks push fit to PCB
T BnnDHHD Threaded Insert (4-40) to fix to chassis)
YR Card Extender End mount
on 0.05 in (1.27 mm) pin pitch
Accepts PCB
thickness
0.062 in (1.57 mm)
D BnnDHRD Through Hole for fixing to chassis
N BnnDHNN No fixing part
Q BnnDHNQ Saddle Mount, for Card Extender to fix to PCB
T BnnDHND Threaded Insert (4-40) to fix to chassis)
YS Through Hole - 2 rows of pins
on 0.05 in (1.27 mm) pin pitch
0.200 in
(5.08 mm)
B BnnDYSN Open End Slot, No fixing part
D BnnDYSD Through Hole for fixing vertically to PCB
N BnnDYSN No fixing part
R BnnDYSR Board Locks push fit to PCB
T BnnDYSD Threaded Insert (4-40) to fix to chassis)

Back to Part Number Format

Variants Possible on Number of Contacts per Row

Ways per Row HF HH HL HN HR YF YH YR YS
5 Y
6
8 Y - Y
9 Y
10
13
14
15
16 Y -
20 Y
22 Y -
24 Y - Y
25 Y
30
34
35
40
44
45
50
55
60
62 Y -
64 Y
65
66
70
75
80
81 Y -
85 Y
90
95
100
105
106
108
110
120 N Mounting Only N or R N Only N or R

Back to Part Number Format

© 2017 onwards by PC Services, Reading UK Last Updated: 8th March 2017
If you encounter problems with this page please email your comments to webmaster